Used Marconi Equipment | Sell Marconi | Trade Marconi | About  | Contact Us

 


Accessories
 Control Processors
 Modules
 Port Cards
 Switches
 Home

 

 



Used Marconi Fore Control Processors

SCP-4000-P2-512-DS1-R
Redundant Pentium II Switch Control Processor w / DS1 BITS Timing
SCP-4000-P2-512-E1-R
Redundant Pentium II Switch Control Processor w / E1 BITS Timing
SCP-4000-P2-512-R
ASX-4000, Redundant 450Mhz Pentium II Switch Control Processor Module
SCP-4000-P3-512-DS1
ASX-4000 Pentium 3, 512MB Switch Control Processor w / DS1 BITS Timing
SCP-4000-P3-512-E1
ASX-4000 Pentium 3, 512MB Switch Control Processor w / E1 BITS Timing
SCP-4000-PPRO-256
ASX-4000 Pentium Pro 256MB Switch Control Processor
SCP-4000-PPRO-256-R
ASX-4000, Redundant 200Mhz Pentium Processor Module (Redundant)
SCP-ASXHA
Switch Control
SCP-ASXHA-16
Switch Control Processor Module
SCP-ASXHA-16 / 32
16MB / 32MB, Switch Control Processor for 200BX / ASX1000
SCP-ASXHA-32
32MB, Switch Control Processor for 200BX / ASX1000
SCP-ASXP5
Pentium 166MHz 64MB, Switch Control Processor
SCP-CF16
Switch Control Processor Module
SCP-HA16
Switch Control Processor Module
SCP-HA-32-R
Switch Control Processor i960, Redundant
SCPOO-7085
Processor II
SCP-P5-166-R
Redundant Pentium 166MHz SCP, 64MB DRAM, 8MB Sharp Flash
SCP-P5-200
Pentium - 200MHz, 64MB DRAM Switch Control Processor, 16MB Flash
SCP-P5-200-I
Pentium SCP, 200 MHz, 64MB DRAM
SCP-TNX-P200-HM-I

Redundant 200 MHz Pentium SCPs - 256 MB DRAM (two 256 MB 200 MHz Pentium Switch Control Processors installed in place of 266 MHz 64 MB Pentium SCPs). Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (TNX210/1100 factory installed option)

 
SCP-TNX-P266-HM-I

Redundant Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash(two 256 MB 266 MHz Pentium Switch Control Processors installed in place of 266 MHz 64 MB Pentium SCPs). Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (TNX210/1100 factory installed option)

 
SCP-TNX-P5200-I

Redundant 200 MHz Pentium SCPs - 64 MB DRAM (two 64 MB 200 MHz Pentium Switch Control Processors installed in place of 266 MHz Pentium SCPs) Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (TNX210/1100 factory installed option)

 
SCP-TNX-P5400-I

Redundant Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash (installed in place of 266 MHz Pentium SCPs w/ 64 MB DRAM and 16 MB Flash) Requires ForeThought 8.0 or greater software, or a patch to Forethought 7.0 or 7.1 (TNX210/1100 factory installed upgrade)

 
SCP-TNX-P5400-HM-I

Redundant Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed in place of 266 MHz Pentium SCPs w/ 64 MB DRAM and 16 MB Flash) Requires ForeThought 8.0 or greater software, or a patch to Forethought 7.0 or 7.1 (TNX210/1100 factory installed upgrade)

 
SCP-P5-266

Pentium 266MHz 64MB Switch Control Processor
SCP-P5-400
Switch Control Processor, 400MHz
SCP-P5-400-HM
Pentium SCP Switch Control Processor, 400MHz, 512MB DRAM, 32MB Flash
SCP-P5-266-1200-HM-I

Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash (installed in place of a 266 MHz Pentium Processor w/ 64 MB DRAM). Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX1200 factory installed upgrade)

SCP-P5-266-HM-R

Redundant Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash (266 MHz Pentium SCP installed in redundant configuration); must be same type as primary SCP (256 MB DRAM) in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed upgrade)

SCP-P5-266-I

Pentium 266 MHz Switch Control Processor with 64 MB DRAM and 16 MB flash (64 MB Pentium Switch Control Processor installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000 factory installed upgrade)

SCP-P5-266-R

Pentium 266 MHz Switch Control Processor with 64 MB DRAM and 16 MB flash (64 MB Pentium Switch Control Processor installed in redundant configuration); must be same type as primary SCP in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed option)

SCP-P5-400-ASX12-I

Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 266 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX1200 factory installed upgrade)

SCP-P5-400-BX-I

Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 ASX200BX factory installed upgrade)

SCP-P5-400-HM-BX-I

Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 ASX200BX factory installed upgrade)

SCP-P5-400-R

Redundant Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash, (400 MHz Pentium SCP installed in redundant configuration)*; must be same type as primary SCP in switch module. *Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX200/1200 factory installed upgrade)

SCP-P5-400-HM-R

Redundant Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash, (400 MHz Pentium SCP installed in redundant configuration)*; must be same type as primary SCP in switch module. *Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX200/1200 factory installed upgrade)

TNX-1100/10AC-3

Redundant Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash (installed in place of 266 MHz Pentium SCPs w/ 64 MB DRAM and 16 MB Flash) Requires ForeThought 8.0 or greater software, or a patch to Forethought 7.0 or 7.1 (TNX210/1100 factory installed upgrade)

SCP-TNX-P5400-HM-I

Redundant Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed in place of 266 MHz Pentium SCPs w/ 64 MB DRAM and 16 MB Flash) Requires ForeThought 8.0 or greater software, or a patch to Forethought 7.0 or 7.1 (TNX210/1100 factory installed upgrade)

SCP-P5-200-HM-I

Pentium SCP - 200 MHz, 256 MB DRAM (installed in place of a 200 MHz Pentium Processor w/ 64 MB DRAM). Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed option)

 
SCP-P5-200-HM-R
Redundant Pentium 200 MHz SCP - 256 MB DRAM (200 MHz Pentium SCP installed in redundant configuration); must be same type as primary SCP (256 MB DRAM) in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed option)  
SCP-P5-200-I

Pentium SCP - 200 MHz, 64 MB DRAM (installed in place of a 266 MHz Pentium Processor) Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX1200 factory installed option)

 
SCP-P5-200-R

Redundant Pentium 200 MHz SCP - 64 MB DRAM 200 MHz Pentium SCP installed in redundant configuration); must be same type as primary SCP in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed option)

 
SCP-P5-266-HM-I

Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash (installed in place of a 200 MHz Pentium Processor w/ 64 MB DRAM). Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000 factory installed upgrade)

 
SCP-P5-266-1200-HM-I

Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash (installed in place of a 266 MHz Pentium Processor w/ 64 MB DRAM). Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX1200 factory installed upgrade)

 
SCP-P5-266-HM-R

Redundant Pentium 266 MHz Switch Control Processor with 256 MB DRAM and 16 MB flash (266 MHz Pentium SCP installed in redundant configuration); must be same type as primary SCP (256 MB DRAM) in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed upgrade)

 
SCP-P5-266-I

Pentium 266 MHz Switch Control Processor with 64 MB DRAM and 16 MB flash (64 MB Pentium Switch Control Processor installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000 factory installed upgrade)

 
SCP-P5-266-R

Pentium 266 MHz Switch Control Processor with 64 MB DRAM and 16 MB flash (64 MB Pentium Switch Control Processor installed in redundant configuration); must be same type as primary SCP in switch module. Requires ForeThought 7.0 or greater software, or software patch to FT6.1.1 or FT6.2 (ASX200/1000/1200 factory installed option)

 
SCP-P5-400-ASX12-I

Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 266 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX1200 factory installed upgrade)

 
SCP-P5-400-BX-I

Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 ASX200BX factory installed upgrade)

 
SCP-P5-400-HM-BX-I

Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash (installed at factory in place of Pentium 200 MHz 64 MB SCP) Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 ASX200BX factory installed upgrade)

 
SCP-P5-400-R

Redundant Pentium 400 MHz Switch Control Processor with 256 MB DRAM and 32 MB Flash, (400 MHz Pentium SCP installed in redundant configuration)*; must be same type as primary SCP in switch module. *Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX200/1200 factory installed upgrade)

 
SCP-P5-400-HM-R

Redundant Pentium 400 MHz Switch Control Processor with 512 MB DRAM and 32 MB Flash, (400 MHz Pentium SCP installed in redundant configuration)*; must be same type as primary SCP in switch module. *Requires ForeThought 8.0 or greater software, or software patch to FT7.0 or 7.1 (ASX200/1200 factory installed upgrade)

 

Call us today at 1.800.908.9665 and speak to a sales representative about purchasing network hardware and accessories.